Menu
Specialty Range Specifications
ANTI BACTERIAL PAINT
- A high performance satin/mid sheen flexible wall / ceiling anti bacterial paint
- Ideal for interior and exterior high traffic areas that need a highly washable and durable coating – plaster, hardboard and fiber cement.
- Protection Hospital wall surfaces which need protection from bacterial attack.
- Water based: Low odor and easy cleaning.
- Highly durable and UV resistant for South African harsh climate.
- Quick drying.
- Excellent wear resistance properties.
- Washable: Meets the requirements of the SABS and ASTMS scrubs resistant test methods.
- Mar and scratch resistant.
- Good color stability.
- Non Yellowing: Unlike alkyd based paints whites and colors will not yellow.
- Water and steam resistant.
- Excellent resistance to spatter.
- Excellent adhesion, good flow and excellent opacity.
- If correctly applied to a properly prepared substrate the product has a life expectancy of 7-10 years, possibly longer.
- Very low levels of VOC. 16g / Lt.
- Type: Pure Acrylic.
- Appearance: Sheen.
- Colors: Available in a range of popular ready mixed colors.
- Solids: 50% – 52% volume.
- Density: 1.2 – 1.4.
- Viscosity at 25ºC: 95 – 100 Krebs µ.
- Flash Point: Non-flammable.
- Mixing: Stir well before use.
- Method: Short nap roller, brush or airless spray.
- Thinning: Not recommended. Thinning reduces the opacity. For spraying you can thin up to 10% with clean water.
- Clean up: Tap water
- Spreading rate: 8-10 m ²/l depending on surface porosity and profile.
- Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
- Drying time: Touch dry ½ – 1 hour. Hard dry 3 hours at 25 degrees.
- Recoating time: 4-6 hours.
- Requirements: 2 coats.
- New Surfaces must be sound, clean and dry before painting.
- Concrete and cement should be filled with Versus Versafill.
- Gypsum Plaster should be primed with Versus Plaster Primer.
- Fibre Cement ceiling boards: the bare metal areas (nail heads) should be primed with Versus Steel Primer.
- Wooden surfaces should be primed with Versus Pink Wood primer.
- Previously Painted Surfaces must be sound, clean and dry before painting.
After all surfaces are sound, clean and dry apply one coat of Versus Universal Undercoat as a tie coat. Other areas that have chalked and are powdery should be well sanded and sealed with Versus Plaster Primer.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not apply directly to bare metal surfaces.
- Drying times will be extended during wet or cold weather conditions.
- Do not apply direct to chalky or friable surfaces.
- Do not apply before 9am and after 4pm in the winter.
- Do not apply exterior if it looks like rain will occur within 4-6 hours of application. Do not apply direct to chalky or friable surfaces.
ANTI MOSQUITO PAINT
- Ideal for interior & exterior walls / ceilings.
- Suitable for correctly prepared new plaster.
- Suitable for correctly primed wood & metal surfaces.
- Ideal for interior and exterior high traffic areas that need a highly washable and durable coating – plaster, hardboard and fiber cement.
- Protection Hospital wall surfaces which need protection from bacterial attack.
- Water based: Low odor and easy cleaning.
- Highly durable and UV resistant for South African harsh climate.
- Quick drying.
- Repels mosquitoes for up to 3 years.in doors.On exterior surfaces,the duration of the repellant will be affected by ageing & weathering of the coating.
- Metal surfaces must first be primed.Do not apply to bare metal.
- Washable: Meets the requirements of the SABS and ASTMS scrubs resistant test methods.
- Good color stability.
- Non Yellowing: Unlike alkyd based paints whites and colors will not yellow.
- Water and steam resistant.
- Excellent resistance to spatter.
- Excellent adhesion, good flow and excellent opacity.
- Very low levels of VOC. 16g/Lt.
- Type: Pure Acrylic.
- Appearance: Sheen.
- Colors: Available in a range of popular ready mixed colours.
- Solids: 35% by mass:21% by volume.
- S.G 1.2kg / Litre.
- Spread Rate 8 / 11 Meters 2 per litre per coat.Depending on surface porosity and profile.
- Recommended Dry Film Thickness 35 um – 45 um
- Drying Time.Touch Dry 15 – 25 minutes @ 23 degree c.
- Dry to handle 1 Hour @ 23 degree c.
- Overcoating 1Hour @ 23 degree c.
- Viscosity 95 / 100 Ku @ 23 degree c.
- Flash Point.Non Flammable
- Mixing: Stir well before use.
- Method: Short nap roller, brush or airless spray.
- Thinning: Not recommended. Thinning reduces the opacity. For spraying you can thin up to 10% with clean water.
- Clean up: Tap water.
- For best results ensure that all four walls as well as the ceilings are painted.
- New Surfaces must be sound, clean and dry before painting.
- Concrete and cement should be filled with Versus Versafill.
- Gypsum Plaster should be primed with Versus Plaster Primer.
- Fibre Cement ceiling boards: the bare metal areas (nail heads) should be primed with Versus Steel Primer.
- Wooden surfaces should be primed with Versus Pink Wood primer.
- Galvanized Iron should be cleaned first with Versus Galvanized Iron Cleaner until a water break free surface has been achieved. Thereafter prime with Versus Galvanized Iron Primer and followed with Versus Universal Undercoat.
- Rusted Metals should be wire brushed or sanded to remove all rust. Prime with Versus Steel Primer. Thereafter apply Versus Universal Undercoat.
- PVC gutters and downpipes should be degreased and then abraded with fine sandpaper and then the topcoat can be applied directly.
- Previously Painted Surfaces must be sound, clean and dry before painting.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 5 litres and 20 litres
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not apply directly to bare metal surfaces.
- Drying times will be extended during wet or cold weather conditions.
- Do not apply direct to chalky or friable surfaces.
- Do not apply before 9am and after 4pm in the winter.
- Do not apply exterior if it looks like rain will occur within 4-6 hours of application. Do not apply direct to chalky or friable surfaces.
BEACH SAND
- A water based acrylic mosquito repellent coating for interior / exterior use.
- Ideal for interior & exterior walls / ceilings.
- Suitable for correctly prepared new plaster.
- Suitable for correctly primed wood & metal surfaces.
- Water based: Low odor and easy cleaning.
- Highly durable and UV resistant for South African harsh climate.
- Quick drying.
- Repels mosquitoes for up to 3 years.in doors.On exterior surfaces,the duration of the repellant will be affected by ageing & weathering of the coating.
- Metal surfaces must first be primed.Do not apply to bare metal.
- Washable: Meets the requirements of the SABS and ASTMS scrubs resistant test methods.
- Good color stability.
- Non Yellowing: Unlike alkyd based paints whites and colors will not yellow.
- Water and steam resistant.
- Excellent resistance to spatter.
- Excellent adhesion, good flow and excellent opacity.
- Very low levels of VOC. 16g/Lt.
- Type: Pure Acrylic.
- Appearance: Sheen.
- Colors: Available in a range of popular ready mixed colours.
- Solids: 35% by mass:21% by volume.
- S.G 1.2kg / Litre.
- Spread Rate 8 / 11 Meters 2 per litre per coat.Depending on surface porosity and profile.
- Recommended Dry Film Thickness 35 um – 45 um
- Drying Time.Touch Dry 15 – 25 minutes @ 23 degree c.
- Dry to handle 1 Hour @ 23 degree c.
- Overcoating 1Hour @ 23 degree c.
- Viscosity 95 / 100 Ku @ 23 degree c.
- Flash Point.Non Flammable
- Mixing: Stir well before use.
- Method: Short nap roller, brush or airless spray.
- Thinning: Not recommended. Thinning reduces the opacity. For spraying you can thin up to 10% with clean water.
- Clean up: Tap water.
- For best results ensure that all four walls as well as the ceilings are painted.
- New Surfaces must be sound, clean and dry before painting.
- Concrete and cement should be filled with Versus Versafill.
- Gypsum Plaster should be primed with Versus Plaster Primer.
- Fibre Cement ceiling boards: the bare metal areas (nail heads) should be primed with Versus Steel Primer.
- Wooden surfaces should be primed with Versus Pink Wood primer.
- Galvanized Iron should be cleaned first with Versus Galvanized Iron Cleaner until a water break free surface has been achieved. Thereafter prime with Versus Galvanized Iron Primer and followed with Versus Universal Undercoat.
- Rusted Metals should be wire brushed or sanded to remove all rust. Prime with Versus Steel Primer. Thereafter apply Versus Universal Undercoat.
- PVC gutters and downpipes should be degreased and then abraded with fine sandpaper and then the topcoat can be applied directly.
- Previously Painted Surfaces must be sound, clean and dry before painting.
After all surfaces are sound, clean and dry apply one coat of Versus Universal Undercoat as a tie coat. Other areas that have chalked and are powdery should be well sanded and sealed with Versus Plaster Primer.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 5 litres and 20 litres
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not apply directly to bare metal surfaces.
- Drying times will be extended during wet or cold weather conditions.
- Do not apply direct to chalky or friable surfaces.
- Do not apply before 9am and after 4pm in the winter.
- Do not apply exterior if it looks like rain will occur within 4-6 hours of application. Do not apply direct to chalky or friable surfaces.
GLITTER PAINT
A high performance satin/mid sheen Glitter flexible wall paint.
Meets the requirements of SABS 1586 Grade 1.
- Ideal for interior and exterior high traffic areas that need a highly washable and durable coating – plaster, hardboard and fiber cement.
- Suitable for application to correctly primed metal and wooden surfaces.
- Water based: Low odor and easy cleaning.
- Highly durable and UV resistant for South African harsh climate.
- Quick drying.
- Excellent wear resistance properties.
- Washable: Meets the requirements of the SABS and ASTMS scrubs resistant test methods.
- Mar and scratch resistant.
- Good color stability.
- Non Yellowing: Unlike alkyd based paints whites and colors will not yellow.
- Water and steam resistant.
- Excellent resistance to spatter.
- Excellent adhesion, good flow and excellent opacity.
- If correctly applied to a properly prepared substrate the product has a life expectancy of 7-10 years, possibly longer.
- Very low levels of VOC. 20g/Lt.
- Type: Pure Acrylic.
- Appearance: Sheen.
- Colors: Available in a range of popular ready mixed colors.
- Solids: 50% – 52% volume.
- Density: 1.2 – 1.4.
- Recommended Dry Film Thickness: 35µm – 45 µm.
- Viscosity at 25ºC: 95 – 100 Krebs µ.
- Flash Point: Non-flammable.
- Mixing: Stir well before use.
- Method: Short nap roller, brush or airless spray.
- Thinning: Not recommended. Thinning reduces the opacity. For spraying you can thin up to 10% with clean water.
- Clean up: Tap water
- Spreading rate: 8-10 m ²/l depending on surface porosity and profile.
- Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
- Drying time: Touch dry ½ – 1 hour. Hard dry 3 hours at 25 degrees.
- Recoating time: 4-6 hours.
- Requirements: 2 coats.
- New Surfaces must be sound, clean and dry before painting.
- Concrete and cement should be filled with Versus Versafill.
- Gypsum Plaster should be primed with Versus Plaster Primer.
- Fibre Cement ceiling boards: the bare metal areas (nail heads) should be primed with Versus Steel Primer.
- Wooden surfaces should be primed with Versus Pink Wood primer.
- Galvanized Iron should be cleaned first with Versus Galvanized Iron Cleaner until a water break free surface has been achieved. Thereafter prime with Versus Galvanized Iron Primer and followed with Versus Universal Undercoat.
- Rusted Metals should be wire brushed or sanded to remove all rust. Prime with Versus Steel Primer. Thereafter apply Versus Universal Undercoat.
- PVC gutters and downpipes should be degreased and then abraded with fine sandpaper and then the topcoat can be applied directly.
- Previously Painted Surfaces must be sound, clean and dry before painting.
After all surfaces are sound, clean and dry apply one coat of Versus Universal Undercoat as a tie coat. Other areas that have chalked and are powdery should be well sanded and sealed with Versus Plaster Primer.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 5 litres and 20 litres
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not apply directly to bare metal surfaces.
- Drying times will be extended during wet or cold weather conditions.
- Do not apply direct to chalky or friable surfaces.
- Do not apply before 9am and after 4pm in the winter.
- Do not apply exterior if it looks like rain will occur within 4-6 hours of application. Do not apply direct to chalky or friable surfaces.
MONTE CARLO
A fine matt textured paint with glass beads which provides high cover and is very flexible for interior and exterior use.
- For application as a finishing coat for exterior new or previously painted cement plaster, concrete and fiber cement.
- Particularly recommended to obliterate hairline cracks in cement plaster.
- For areas prone to mould growth.
- Ideal for high traffic areas that may require frequent washing.
- Water based: Easy to apply and easy clean up.
- Water resistance: Surpasses the SABS 0400:1900 Code of Practice rain penetration test over a 24 hour period.
- It contains mould inhibitors providing protection against mould regrowth.
- Excellent weather resistance.
- UV Resistant.
- Excellent exterior durability.
- Good colour stability.
- Very good opacity, and alkali resistance, stain resistance and wash ability.
- Type: Pure Acrylic.
Appearance: Matt Texture.
Colours:White and a range of 16 colours. Pastel and medium colours can be
tinted on requested.
Solids: 54-56% by volume.
Density: 1.27-1.35 kg/l.
Viscosity: 25°C: 120-120.
Flash Point: Non-Flammable
Mixing: Shake or stir well before use.
Thinning: Not recommended, but tap eater if required (First Coat). Thinning reduces
the opacity as well as crack bridging properties.
Clean Up: Tap Water.
Spreading Rate: 3-5m²/l depending on surface porosity and profile.
Conditions: Avoid painting in wet or cold weather. Minimum temp 8°C
Drying Time: 1/2 -1 hour at 25 degrees. Hard dry 4 hours at 25°C
Requirements: 2 Coats
New Surfaces must be sound, clean and dry before painting.
- Concrete and Cement: Apply 2 coats directly on the surface. The first coat can be thinned to a maximum of 10% water.
- Fiber Cement: Apply 2 coats. The 1st coat may be thinned with 10% clean water to aid penetration.
- PVC gutters and downpipes: Should be abraded with fine sandpaper before the topcoat can be applied.
Previously Painted Surfaces must be sound *no chalking), clean and dry before painting.
Enamel surfaces must be sanded first and then a coat of Versus Universal Undercoat must be applied before applying the top coat.
- Keep container properly sealed after use.
- Keep away from direct sunlight, heat and sever cold.
- 1 litres and 5 litres
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not apply directly to bare metal surfaces.
- Do not paint in wet or cold weather (Minimum 8°C)
- Drying times will be extended during wet or cold weather conditions.
- Do not apply direct to chalky or friable surfaces. Apply a penetrating coat of Versus Bonding Liquid or Versaprime Plaster Primer.
ECO-BEBE
Eco – bebe baby paint is an eco – friendly paint that is suitable for your nursery ,cots & baby toys.
- These baby safe paints are non – toxic and low V.O.C.
- .They can be used to create a delicate,non harmful finish to your babies environment.
- Water based: Low odour and easy cleaning.
- Highly durable.
- Quick drying.
- Excellent wear resistance properties.
- Washable: Meets the requirements of the SABS and ASTMS scrubs resistant test methods.
- Mar and scratch resistant.
- Good color stability.
- Non Yellowing: Unlike alkyd based paints whites and colors will not yellow.
- Water and steam resistant.
- Excellent resistance to spatter.
- Excellent adhesion, good flow and excellent opacity.
- If correctly applied to a properly prepared substrate the product has a life expectancy of 7-10 years, possibly longer.
- Very low levels of VOC. 16g/Lt.
- Type: Pure Acrylic.
- Appearance: Sheen.
- Colors: Available in a range of popular ready mixed colors.
- Solids: 50% – 52% volume.
- Density: 1.2 – 1.4.
- Viscosity at 25ºC: 95 – 100 Krebs µ.
- Flash Point: Non-flammable.
- Mixing: Stir well before use.
- Method: Spray application as per equipment application. Specification for spray application Pressure Pot Graco Delta Gun 1.8mm.
- Brush can be used for small areas only.
- Thinning: If required Versus T. Thinner.
- Clean up: Versus T. Thinners.
- Spreading rate: 2 – 5 m ²/l depending on surface porosity and profile.
- Conditions: Do not spray when the relative humidity is above 85%.
- Drying time: 2 hours.
- Recoating time: 4-6 hours.
- Requirements: 1 coat.
New Surfaces must be sound, clean and dry before painting.
- Concrete and cement should be filled with Versus Versafill.
- Gypsum Plaster should be primed with Versus Water Plaster Primer.
- Wooden surfaces should be primed with Versus Water Based Pink Wood primer.
Previously Painted Surfaces must be sound, clean and dry before painting.
After all surfaces are sound, clean and dry apply one coat of Eco – bebe
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 5 litres and 20 litres
- Detailed safety information: refers to the material safety data sheet for this product.
- Drying times will be extended during wet or cold weather conditions.
- Do not apply direct to chalky or friable surfaces.
- Do not apply before 9.00am and after 4 pm in winter.
- Do not apply direct to chalky or friable surfaces.
ROAD MARKING PAINT
Solvent based road line paint made to meet the requirements of SANS SPEC731.
- Recommended for the marking of roadway, car parks and parking garages.
- Signwriting on roads.
- Beaded product is used to improve night visibility by including beads or sprinkling beads onto the wet painted surfaces.
- Durability: Highly durable and UV resistant for the harsh South African climate.
- Type: Modified Alkyd Resin.
- Appearance: Matt.
- Colors: White, Golden yellow, black and red.
- Solids: 61% by mass.
- Viscosity: 80 – 85 Krebs µ.
- Max VOC Level: 600g/l.
- Recommended Dry Film Thickness: 150 Microns.
- Flash Point: 2ºC.
- Mixing: Stir well before use.
- Method: Spray application as per equipment application. Specification for spray application Pressure Pot Graco Delta Gun 1.8mm.
- Brush can be used for small areas only.
- Thinning: If required Versus T. Thinner.
- Clean up: Versus T. Thinners.
- Spreading rate: 2 – 5 m ²/l depending on surface porosity and profile.
- Conditions: Do not spray when the relative humidity is above 85%.
- Drying time: 2 hours.
- Recoating time: 4-6 hours.
- Requirements: 1 coat.
- All Surfaces must be sound, clean and dry before painting and free from loose sand, oil, grease and other debris.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 5 Litres – 20 Litres – 200 Litres.
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not use excessive amount of thinners as this will degrade the durability of the coating.
VERSUS FLOOR PAINT
Premium quality tough UV stable floor coating for interior and exterior cement and concrete floor surfaces
- New or previously painted interior and exterior cement or concrete floors.
- Application to stoeps and window sills.
- Alkali Resistant.
- Durability: Highly durable and UV resistant for the harsh South African climate.
- Excellent mechanical abrasion resistance.
- Type: Urethane resin.
- Appearance: Gloss.
- Colors: White and Grey.
- Solids: 50% – 60%.
- Viscosity at 25ºC: 70 – 75 Krebs µ.
- Gravity: 0.85 – 1.00.
- Density: 1.10 – 1.20.
- Dry Film thickness: 150 Microns.
- Flash Point: 40ºC.
- Mixing: Stir well before use.
- Method: Brush or mohair roller. Application by brush ensures penetration.
- Thinning: Mineral Turpentine.
- Clean up: Mineral Turpentine.
- Spreading rate: 8-10 m ²/l depending on surface porosity and profile.
- Conditions: Avoid painting in wet or cold weather. Minimum temp 8ºC.
- Drying time: Touch dry 2 hours. Hard dry 16 hours at 25ºC.
- Recoating time: 18 hours.
- Requirements: 2 coats.
All Surfaces must be sound, clean and dry before painting.
- New and old concrete and cement surfaces:
Moisture content of new plaster must be less than 12%. Floors surfaces should be acid washed with Spirits of salt. Rinse well with clean water and allow drying.
Apply 2 coats of Versus Stoep Paint.
- Previously painted floors in bad condition:
Strip surfaces thoroughly to remove all dirt and debris. Acid wash the floors with Spirits of salts. Rinse well and allow drying and apply 2 coats Versus Stoep Paint.
- Previously painted floors in good condition:
Rub the surface down with sandpaper. Wash and rinse with clean water and allow drying and apply 1 or 2 coats of Versus Stoep Paint.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 5 Litres.
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not apply to wet surfaces.
- Drying times will be extended during wet or cold weather conditions.
Experience the difference for yourself.
Transform your space today with our high-quality, premium paints and expert services. Elevate your walls to a level of sophistication that will leave a lasting impression. Contact Versus Paint now and experience the difference for yourself. Let’s create a masterpiece together.
Talk to us
011 885 3136
Send us email
info@versuspaint.co.za
Trust Versus Paint to bring sophistication and style to every brush stroke.
Everything we do is done with a sense of purpose and passion. We know what it takes to make a statement, and we do it with flair.
Join us in the world of luxury, where only the best will do. Choose Versus Paint and experience the Lux Life in all its glory.