Application Details:

• Mixing: Shake or stir well before use.
• Thinning: Not recommended, but tap eater if required (First Coat). Thinning reduces the opacity as well as crack bridging properties.
• Clean Up: Tap Water.
• Spreading Rate: 3-5m²/l depending on surface porosity and profile.
• Conditions: Avoid painting in wet or cold weather. Minimum temp 8°C
• Drying Time:  1/2 -1 hour at 25 degrees. Hard dry 4 hours at 25°C
• Requirements: 2 Coats

Surface Preparation: 

• New Surfaces must be sound, clean and dry before painting.
  • • Concrete and Cement: Apply 2 coats directly on the surface. The first coat can be thinned to a maximum of 10% water.
    • Fiber Cement: Apply 2 coats. The 1^st coat may be thinned with 10% clean water to aid penetration.
    • PVC gutters and downpipes: Should be abraded with fine sandpaper before the topcoat can be applied.

  Previously Painted Surfaces must be sound *no chalking), clean and dry before painting.

  Enamel surfaces must be sanded first and then a coat of Versus Universal Undercoat must be applied before applying the top coat.

Storage:

• Keep containers properly sealed.
• Store away from direct heat, sun and severe cold.

Precautions

• Detailed safety information: refers to the material safety data sheet for this product.
• Do not apply directly to bare metal surfaces.
• Do not paint in wet or cold weather (Minimum 8°C)
• Drying times will be extended during wet or cold weather conditions.
• Do not apply direct to chalky or friable surfaces. Apply a penetrating coat of Versus Bonding Liquid or Versaprime Plaster Primer.