Application Details: 

• Mixing: Stir well before use.
• Method: Short nap roller, brush or airless spray.
• Thinning: Not recommended. Thinning reduces the opacity. For spraying you can thin up to 10% with clean water.
• Clean up: Tap water
• Spreading rate: 8-10 m ²/l depending on surface porosity and profile.
• Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
• Drying time: Touch dry ½ – 1 hour. Hard dry 3 hours at 25 degrees.
• Recoating time: 4-6 hours.
• Requirements: 2 coats.

Surface Preparation:

• New Surfaces must be sound, clean and dry before painting.
• Concrete and cement should be filled with Versus Versafill.
• Gypsum Plaster should be primed with Versus Plaster Primer.
• Fibre Cement ceiling boards: the bare metal areas (nail heads) should be primed with Versus Steel Primer.
• Wooden surfaces should be primed with Versus Pink Wood primer.
• Previously Painted Surfaces must be sound, clean and dry before painting.

After all surfaces are sound, clean and dry apply one coat of Versus Universal Undercoat as a tie coat. Other areas that have chalked and are powdery should be well sanded and sealed with Versus Plaster Primer.

Storage: 

• Keep containers properly sealed.
• Store away from direct heat, sun and severe cold.

Packaging: 

• 5 litres and 20 litres

Precautions: 

• Detailed safety information: refers to the material safety data sheet for this product.
• Do not apply directly to bare metal surfaces.
• Drying times will be extended during wet or cold weather conditions.
• Do not apply direct to chalky or friable surfaces.
• Do not apply before 9am and after 4pm in the winter.
• Do not apply exterior if it looks like rain will occur within 4-6 hours of application. Do not apply direct to chalky or friable surfaces.