Menu
ENAMELS Specifications
VERSATHANE POLYURETHANE ENAMEL
- Premium quality tough low sheen polyurethane enamel for use on interior and exterior surfaces.
- Ideal for use on suitably primed plastered walls, wood and metal surfaces.
- The perfect product for bathroom walls and ceilings requiring a low sheen finish.
- Ideal for use on high traffic areas or surfaces that may require frequent washing.
- Ideal for painting doors, windows, cupboards and skirtings.
- Easy to keep clean.
- Very tough and hardwearing.
- Lead free.
- Excellent exterior durability.
- Good color stability.
- Very good opacity, stain resistance and wash ability.
- Smooth low sheen finish for the interior.
- Excellent brush application sag resistant.
- Type: Polyurethane Alkyd.
- Appearance: Low Sheen.
- Colors: White, black and a range of colors. Pastel, Medium and Deep tone colors can be tinted on request.
- Solids: 61% by mass and 43% by volume.
- Density: 1.22.
- Recommended Dry Film Thickness: Minimum 25 µm and maximum 35µm.
- Specific Gravity: 1.22.
- Flash Point: Flammable at 34ºC.
- Mixing: Do not stir or thin as this will break down de gel structure.
- Method: Short nap mohair roller or brush.
- Thinning: Do not thin.
- Clean up: Mineral Turpentine.
- Spreading rate: 9 m ²/l depending on surface porosity and profile.
- Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
- Drying time: Touch dry 1 hour. Hard dry 8 hours at 25 degrees.
- Requirements: 2 coats.
New Surfaces must be sound, clean and dry before painting.
- Cement: Prime with 1 coat Versus Plaster Primer followed with 2 coats of Versus Versathane Polyurethane Enamel.
- Wooden surfaces: Apply Versus Pink Wood Primer followed with Versus Universal Undercoat prior to the application of 2 coats Versus Versathane Polyurethane Enamel.
- Rusted Metals should be wire brushed or sanded to remove all rust. Prime with Versus Steel Primer. Thereafter apply 2 coats of Versus Versathane Polyurethane enamel.
- PVC gutters and downpipes should be degreased and then abraded with fine sandpaper. Apply the topcoats.
Previously Painted Surfaces must be sound, clean and dry before painting.
After all surfaces are sound, clean and dry apply one coat of Versus Universal Undercoat as a tie coat. Other areas that have chalked and are powdery should be well sanded and sealed with Versus Plaster Primer before applying 2 coats of Versus Versathane Polyurethane Enamel.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 1 Liter and 5 Litres.
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not apply directly to bare (unprimed) surfaces.
- Do not paint in wet or cold weather. (Minimum 5ºC.)
- Drying times will be extended during wet or cold weather conditions.
- When coating is friable or plastered surfaces apply a generous coat of Versus Plaster Primer.
EGGSHELL ENAMEL
- A top of the range durable interior solvent based paint with an eggshell finish for high traffic areas.
- Suitable for cement plaster, gypsum plaster, concrete, fiber cement, PVC, galvanized iron, ferrous and wooden surfaces.
- Finish for doors, frames, skirting and other trims.
- Ideal for bathrooms and kitchens.
- Final coat for primed interior cement plaster, hardboard, wood and metal.
- Superb appearance. Does not highlight the imperfections.
- Ideal for kitchens and bathrooms, passages where cleaning is done often.
- Excellent flow and leveling.
- Easy application
- Type: Medium Oil Alkyd.
- Appearance: Eggshell.(Semi-Gloss)
- Colors: White and standard colors. Other pastel and medium tones can be tinted on request.
- Solids: 60-62% by mass.
- Density: 1.4- – 1.42 kg/l.
- Dry Film Thickness: Minimum 25 µ and maximum 30 µ.
- Viscosity at 25ºC.: 70-75 Krebs µ.
- Flash Point: Non-flammable.
- Mixing: Stir well before use.
- Method: Short nap mohair roller or brush.
- Thinning: Mineral Turpentine. Thinning not recommended except for application with spray.
- Clean up: Mineral Turpentine.
- Spreading rate: 8 – 10 m ²/l depending on surface porosity and profile.
- Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
- Drying time: Touch dry 4 hours. Hard dry 18 hours at 25 degrees.
- Recoating time: 18 hours.
- Requirements: 2 coats
- New Surfaces: must be sound, clean and dry before painting.
- Cement surfaces should be primed with 1 coat of Versus Plaster Primer. Follow with 1 coat of Versus Universal Undercoat and thereafter apply Versus Eggshell Enamel.
- Wooden surfaces should be primed with Versus Wood Primer. Follow with 1 coat Versus Universal Undercoat before applying the Versus Eggshell Enamel.
- Metal surfaces: Rust should be removed and then primed with 1 coat Versus Steel Primer and followed with 1 coat Versus Universal Undercoat before applying the Versus Eggshell Enamel.
- Previously painted Surfaces must be sound, clean and dry before painting.
- Loose flaking paint must be removed and bare areas should be spot primed with an appropriate primer before applying Versus Universal Undercoat and to finish with Versus Eggshell Enamel.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 1 Liter and 5 Litres. (20 Litres on request).
GLOSS ENAMEL
- Top quality tough, traditional, solvent and oil based interior exterior high gloss enamel.
- Final coat for interior and exterior cement plaster, wood, metal.
- Previously painted surfaces in sound condition.
- Easy to clean due to low dirt retention.
- Ideal for use on high traffic areas or surfaces that may require frequent washing.
- Very tough and hardwearing.
- Ideal for painting doors, windows.
- Easy to keep clean.
- Very tough and hardwearing.
- Lead free.
- Excellent exterior durability.
- Good color stability.
- Very good opacity, stain resistance and wash ability.
- Type: Long Oil Alkyd.
- Appearance: High Gloss.
- Colors: White and a range of colors. Pastel, Medium and Deep tone colors can be tinted on request.
- Solids: 64 – 66% by mass.
- Density: 1.08 – 1.20.
- Recommended Dry Film Thickness: Minimum 20 µm and maximum 30µm.
- Specific Gravity: 1.08 – 1.2.
- Viscosity at 25ºC. : 65 -70 Krebs µ.
- Flash Point: 34ºC.
- Mixing: Stir well before use.
- Method: Short nap mohair roller or brush.
- Thinning: Do not thin.
- Clean up: Mineral Turpentine.
- Spreading rate: 8 – 10 m ²/l depending on surface porosity and profile.
- Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
- Drying time: Touch dry 4 hours. Hard dry 18 hours at 25 degrees.
- Recoating time: 18 hours.
- Requirements: 2 coats.
New Surfaces must be sound, clean and dry before painting.
- Concrete and cement: Prime with 1 coat Versus Plaster Primer followed with 1 coat of Versus Universal Undercoat before applying the topcoats..
- Wooden surfaces should be primed with Versus Pink Wood primer and followed with Versus Universal Undercoat.
- Galvanized Iron should be cleaned first with Versus Galvanized Iron Cleaner until a water break free surface has been achieved. Thereafter prime with Versus Galvanized Iron Primer and followed with Versus Universal Undercoat.
- Rusted Metals should be wire brushed or sanded to remove all rust. Prime with Versus Steel Primer. Thereafter apply Versus Universal Undercoat.
- PVC gutters and downpipes should be degreased and then abraded with fine sandpaper. Apply the topcoat.
- Previously Painted Surfaces must be sound, clean and dry before painting.
After all surfaces are sound, clean and dry apply one coat of Versus Universal Undercoat as a tie coat. Other areas that have chalked and are powdery should be well sanded and sealed with Versus Plaster Primer.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 1 Liter and 5 Litres. (20 Litres on request).
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not apply directly to bare surfaces.
- Do not paint in wet or cold weather. (Minimum 5ºC.)
- Drying times will be extended during wet or cold weather conditions.
- Application must be even to prevent variations in gloss levels.
- Yellowing will occur with time in dark areas.
MATT ENAMEL
- A high quality enamel for use on various surfaces both internally and externally.
- Ideal for use on suitably primed interior plastered walls, wood and metal surfaces.
Type: Long oil Alkid
DFT/Coat: MIN 20UM. Max 30UM
Colours: Available in white, Pastel, Medium and Dark Tones can be tinted on
request.
Drying Time: Surface dry 4 hours, Hard Dry 18 hours at 25°ͨ.
Viscosity: 65-70ku
Specific Gravity:1.08-1.2
Spreading Rate: 8-10m²/l (Typical) depending on surface porosity and texture.
Solids: 64-66% by mass
Finish: Matt
Clean Up: Mineral Turps
- Surface must be clean and free from loose material.
- New work should be correctly primed and undercoated with Versus Universal Undercoat as recommended by the manufacturers prior to applying the top coating.
- May be applied directly onto cleaned previously painted surfaces.
- With either a short nap mohair roller or brush.
- Ensure that the product is well stirred and do not thin.
- Keep container properly sealed after use.
- Keep away from direct sunlight, heat and sever cold.
- 5 litres and 20 litres
- Do not apply to bare (unprimed) metal surface.
- Do not paint in wet or cold weather (Minimum 5°ͨ)
- When coating friable or plastered surfaces apply a generous coat of Alkali Resistant Plaster Primer.
MATT ENAMEL
- A high quality enamel for use on various surfaces both internally and externally.
- Ideal for use on suitably primed interior plastered walls, wood and metal surfaces.
Type: Long oil Alkid
DFT/Coat: MIN 20UM. Max 30UM
Colours: Available in white, Pastel, Medium and Dark Tones can be tinted on
request.
Drying Time: Surface dry 4 hours, Hard Dry 18 hours at 25°ͨ.
Viscosity: 65-70ku
Specific Gravity:1.08-1.2
Spreading Rate: 8-10m²/l (Typical) depending on surface porosity and texture.
Solids: 64-66% by mass
Finish: Matt
Clean Up: Mineral Turps
- Surface must be clean and free from loose material.
- New work should be correctly primed and undercoated with Versus Universal Undercoat as recommended by the manufacturers prior to applying the top coating.
- May be applied directly onto cleaned previously painted surfaces.
- With either a short nap mohair roller or brush.
- Ensure that the product is well stirred and do not thin.
- With either a short nap mohair roller or brush.
- Ensure that the product is well stirred and do not thin.
- Keep container properly sealed after use.
- Keep away from direct sunlight, heat and sever cold.
- 5 litres and 20 litres
- Do not apply to bare (unprimed) metal surface.
- Do not paint in wet or cold weather (Minimum 5°ͨ)
- When coating friable or plastered surfaces apply a generous coat of Alkali Resistant Plaster Primer.
SATIN ENAMEL - no spec
- A high quality enamel for use on various surfaces both internally and externally.
- Ideal for use on suitably primed interior plastered walls, wood and metal surfaces.
Type: Long oil Alkid
DFT/Coat: MIN 20UM. Max 30UM
Colours: Available in white, Pastel, Medium and Dark Tones can be tinted on
request.
Drying Time: Surface dry 4 hours, Hard Dry 18 hours at 25°ͨ.
Viscosity: 65-70ku
Specific Gravity:1.08-1.2
Spreading Rate: 8-10m²/l (Typical) depending on surface porosity and texture.
Solids: 64-66% by mass
Finish: Matt
Clean Up: Mineral Turps
- Surface must be clean and free from loose material.
- New work should be correctly primed and undercoated with Versus Universal Undercoat as recommended by the manufacturers prior to applying the top coating.
- May be applied directly onto cleaned previously painted surfaces.
- With either a short nap mohair roller or brush.
- Ensure that the product is well stirred and do not thin.
- With either a short nap mohair roller or brush.
- Ensure that the product is well stirred and do not thin.
- Keep container properly sealed after use.
- Keep away from direct sunlight, heat and sever cold.
- 5 litres and 20 litres
- Do not apply to bare (unprimed) metal surface.
- Do not paint in wet or cold weather (Minimum 5°ͨ)
- When coating friable or plastered surfaces apply a generous coat of Alkali Resistant Plaster Primer.
SATIN ENAMEL - no spec
- A high quality enamel for use on various surfaces both internally and externally.
- Ideal for use on suitably primed interior plastered walls, wood and metal surfaces.
Type: Long oil Alkid
DFT/Coat: MIN 20UM. Max 30UM
Colours: Available in white, Pastel, Medium and Dark Tones can be tinted on
request.
Drying Time: Surface dry 4 hours, Hard Dry 18 hours at 25°ͨ.
Viscosity: 65-70ku
Specific Gravity:1.08-1.2
Spreading Rate: 8-10m²/l (Typical) depending on surface porosity and texture.
Solids: 64-66% by mass
Finish: Matt
Clean Up: Mineral Turps
- Surface must be clean and free from loose material.
- New work should be correctly primed and undercoated with Versus Universal Undercoat as recommended by the manufacturers prior to applying the top coating.
- May be applied directly onto cleaned previously painted surfaces.
- With either a short nap mohair roller or brush.
- Ensure that the product is well stirred and do not thin.
- With either a short nap mohair roller or brush.
- Ensure that the product is well stirred and do not thin.
- Keep container properly sealed after use.
- Keep away from direct sunlight, heat and sever cold.
- 5 litres and 20 litres
- Do not apply to bare (unprimed) metal surface.
- Do not paint in wet or cold weather (Minimum 5°ͨ)
- When coating friable or plastered surfaces apply a generous coat of Alkali Resistant Plaster Primer.
Experience the difference for yourself.
Transform your space today with our high-quality, premium paints and expert services. Elevate your walls to a level of sophistication that will leave a lasting impression. Contact Versus Paint now and experience the difference for yourself. Let’s create a masterpiece together.
Talk to us
011 885 3136
Send us email
info@versuspaint.co.za
Trust Versus Paint to bring sophistication and style to every brush stroke.
Everything we do is done with a sense of purpose and passion. We know what it takes to make a statement, and we do it with flair.
Join us in the world of luxury, where only the best will do. Choose Versus Paint and experience the Lux Life in all its glory.