Follow us online

Facebook Instagram Linkedin Tiktok
Talk to us

011 885 3136

Top Coat Specifications

STATUS LOW SHEEN

  • A hardwearing high quality sheen finish flexible wall coating for interior and exterior use.
  • Interior and exterior walls, ceilings, down pipes and gutters.
  • Ideal for use on high traffic areas or surfaces that may require frequent washing.
  •  
  • Water based: Low odor and easy cleaning.
  • Water resistance: Surpasses the SABS 0400:1900 Code of Practice rain penetration test over a 24 hour period.
  • Excellent weather resistance.
  • Quick Drying.
  • Excellent exterior durability.
  • Good color stability.
  • Very good opacity, stain resistance and wash ability.
  • Type: Modified Acrylic.
  • Appearance: Sheen.
  • Colors: White and a range of 16 Standard colors. Pastel, Medium and Deep tone colors can be tinted on request.
  • Solids: 50 – 52% by mass.
  • Density: 1.2 – 1.25 kg/l.
  • Recommended Dry Film Thickness: 1 coat at minimum 35 µ and maximum 45 µ.
  • VOC Levels: 20g/Lt.
  • Viscosity at 25ºC. : 95 -100 Krebs µ.
  • Flash Point: Non-flammable.
  •  
  • Mixing: Stir well before use.
  • Method: Sheepskin roller or brush. Can be applied using an airless spray gun.
  • Thinning: Not recommended, but tap water if required. Thinning reduces the opacity.
  • Clean up: Tap water.
  • Spreading rate: 8 – 10 m ²/l depending on surface porosity and profile.
  • Viscosity 95-100 Krebs µ
  • Relative Density 1.2 – 1.25
  • Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
  • Drying time: Touch dry ½ – 1 hour. Hard dry 4 hours at 25 degrees.
  • Recoating time: 4 – 6 hours.
  • Requirements: 2 coats.
  •  
Back to product range
  • Keep containers properly sealed.
  • Store away from direct heat, sun and severe cold.
  • 5 litres and 20 litres
  • Detailed safety information: refers to the material safety data sheet for this product.
  • Do not apply directly to bare metal surfaces.
  • Do not paint in wet or cold weather. (Minimum 8ºC.)
  • Drying times will be extended during wet or cold weather conditions.
  • Do not apply direct to chalky or friable surfaces. Apply a penetrating coat of Versus Bonding Liquid or Versaprime Plaster Primer.
  •  
    • New Surfaces must be sound, clean and dry before painting.
    • Concrete and cement should be filled with Versus Versafill.
    • Gypsum Plaster should be primed with Versus Plaster Primer.
    • Fiber Cement ceiling boards: the bare metal areas (nail heads) should be primed with Versus Steel Primer?
    • Wooden surfaces should be primed with Versus Pink Wood primer.
    • Galvanized Iron should be cleaned first with Versus Galvanized Iron Cleaner until a water break free surface has been achieved. Thereafter prime with Versus Galvanized Iron Primer and followed with Versus Universal Undercoat.
    • Rusted Metals should be wire brushed or sanded to remove all rust. Prime with Versus Steel Primer. Thereafter apply Versus Universal Undercoat.
    • PVC gutters and downpipes should be degreased and then abraded with fine sandpaper and then the topcoat can be applied directly.
    • Previously Painted Surfaces must be sound, clean and dry before painting.

    After all surfaces are sound, clean and dry apply one coat of Versus Universal Undercoat as a tie coat. Other areas that have chalked and are powdery should be well sanded and sealed with Versus Plaster Primer.

     

STATUS SATIN -NO SPEC

  • A hardwearing high quality sheen finish flexible wall coating for interior and exterior use.
  • Interior and exterior walls, ceilings, down pipes and gutters.
  • Ideal for use on high traffic areas or surfaces that may require frequent washing.
  •  
  • Water based: Low odor and easy cleaning.
  • Water resistance: Surpasses the SABS 0400:1900 Code of Practice rain penetration test over a 24 hour period.
  • Excellent weather resistance.
  • Quick Drying.
  • Excellent exterior durability.
  • Good color stability.
  • Very good opacity, stain resistance and wash ability.
  • Type: Modified Acrylic.
  • Appearance: Sheen.
  • Colors: White and a range of 16 Standard colors. Pastel, Medium and Deep tone colors can be tinted on request.
  • Solids: 50 – 52% by mass.
  • Density: 1.2 – 1.25 kg/l.
  • Recommended Dry Film Thickness: 1 coat at minimum 35 µ and maximum 45 µ.
  • VOC Levels: 20g/Lt.
  • Viscosity at 25ºC. : 95 -100 Krebs µ.
  • Flash Point: Non-flammable.
  •  
  • Mixing: Stir well before use.
  • Method: Sheepskin roller or brush. Can be applied using an airless spray gun.
  • Thinning: Not recommended, but tap water if required. Thinning reduces the opacity.
  • Clean up: Tap water.
  • Spreading rate: 8 – 10 m ²/l depending on surface porosity and profile.
  • Viscosity 95-100 Krebs µ
  • Relative Density 1.2 – 1.25
  • Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
  • Drying time: Touch dry ½ – 1 hour. Hard dry 4 hours at 25 degrees.
  • Recoating time: 4 – 6 hours.
  • Requirements: 2 coats.
  •  
Back to product range
  • Keep containers properly sealed.
  • Store away from direct heat, sun and severe cold.
  • 5 litres and 20 litres
  • Detailed safety information: refers to the material safety data sheet for this product.
  • Do not apply directly to bare metal surfaces.
  • Do not paint in wet or cold weather. (Minimum 8ºC.)
  • Drying times will be extended during wet or cold weather conditions.
  • Do not apply direct to chalky or friable surfaces. Apply a penetrating coat of Versus Bonding Liquid or Versaprime Plaster Primer.
  •  
    • New Surfaces must be sound, clean and dry before painting.
    • Concrete and cement should be filled with Versus Versafill.
    • Gypsum Plaster should be primed with Versus Plaster Primer.
    • Fiber Cement ceiling boards: the bare metal areas (nail heads) should be primed with Versus Steel Primer?
    • Wooden surfaces should be primed with Versus Pink Wood primer.
    • Galvanized Iron should be cleaned first with Versus Galvanized Iron Cleaner until a water break free surface has been achieved. Thereafter prime with Versus Galvanized Iron Primer and followed with Versus Universal Undercoat.
    • Rusted Metals should be wire brushed or sanded to remove all rust. Prime with Versus Steel Primer. Thereafter apply Versus Universal Undercoat.
    • PVC gutters and downpipes should be degreased and then abraded with fine sandpaper and then the topcoat can be applied directly.
    • Previously Painted Surfaces must be sound, clean and dry before painting.

    After all surfaces are sound, clean and dry apply one coat of Versus Universal Undercoat as a tie coat. Other areas that have chalked and are powdery should be well sanded and sealed with Versus Plaster Primer.

     

VERSATEX TEXTURED ACRYLIC COATING

  • A fine matt textured paint which provides high cover and is very flexible for interior and exterior use.
  • For application as a finishing coat for exterior new or previously painted cement plaster, concrete and fiber cement.
  • Particularly recommended to obliterate hairline cracks in cement plaster.
  • For areas prone to mould growth.
  • Ideal for high traffic areas or areas that may require frequent washing.
  • Water based: Easy to apply and easy clean up.
  • Water resistance: Surpasses the SABS 0400:1900 Code of Practice rain penetration test over a 24 hour period.
  • It contains mould inhibitors providing protection against mould regrowth.
  • Excellent weather resistance.
  • UV Resistant.
  • Excellent exterior durability.
  • Good color stability.
  • Very good opacity, and alkali resistance, stain resistance and wash ability.-
  •  
  • Type: Pure Acrylic.
  • Appearance: Matt Texture.
  • Colors: White and a range of 16 standard colors. Pastel and Medium colors can be tinted on request.
  • Solids: 54 – 56% by volume.
  • Density: 1.27 – 1.35 kg/l.
  • Viscosity at 25ºC: 120 -120.
  • Flash Point: Non-flammable.
  •  
  • Mixing: Stir well before use.
  • Method: Sheepskin roller or brush. For a more pronounced texture use a honeycomb sponge roller.
  • Thinning: Not recommended, but tap water if required (First coat). Thinning reduces the opacity as well as crack bridging properties.
  • Clean up: Tap water
  • Spreading rate: 3 – 5 m ²/l depending on surface porosity and profile.
  • Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
  • Drying time: ½ – 1 hour at 25 degrees. Hard dry 4 hours at 25ºC.
  • Requirements: 2 coats.
  •  
Back to product range
  • New Surfaces must be sound, clean and dry before painting.
  • Concrete and cement: Apply 2 coats direct on the surface. The first coat can be thinned to a maximum of 10% water.
  • Fibre Cement: Apply 2 coats. The 1st coat may be thinned with 10% clean water to aid penetration.
  • PVC gutters and downpipes: Should be abraded with fine sandpaper before the topcoat can be applied.
  • Previously Painted Surfaces must be sound (no chalking), clean and dry before painting.

After all surfaces are sound, clean and dry apply 2 coats of Versus Textured Paint W.G.

Enamel surfaces must be sanded first and then a coat of Versus Universal Undercoat must be applied before applying the topcoat.

  • Keep containers properly sealed.
  • Store away from direct heat, sun and severe cold.
  • 20 Litres.
  • Detailed safety information: refers to the material safety data sheet for this product.
  • Do not apply directly to bare metal surfaces.
  • Do not paint in wet or cold weather. (Minimum 8ºC.)
  • Drying times will be extended during wet or cold weather conditions.
  • Do not apply direct to chalky or friable surfaces. Apply a penetrating coat of Versus Bonding Liquid or Versaprime Plaster Primer.

TEXTURED ACRYLIC COATING R.C. - no spec

  • A fine matt textured paint which provides high cover and is very flexible for interior and exterior use.
  • For application as a finishing coat for exterior new or previously painted cement plaster, concrete and fiber cement.
  • Particularly recommended to obliterate hairline cracks in cement plaster.
  • For areas prone to mould growth.
  • Ideal for high traffic areas or areas that may require frequent washing.
  • Water based: Easy to apply and easy clean up.
  • Water resistance: Surpasses the SABS 0400:1900 Code of Practice rain penetration test over a 24 hour period.
  • It contains mould inhibitors providing protection against mould regrowth.
  • Excellent weather resistance.
  • UV Resistant.
  • Excellent exterior durability.
  • Good color stability.
  • Very good opacity, and alkali resistance, stain resistance and wash ability.-
  •  
  • Type: Pure Acrylic.
  • Appearance: Matt Texture.
  • Colors: White and a range of 16 standard colors. Pastel and Medium colors can be tinted on request.
  • Solids: 54 – 56% by volume.
  • Density: 1.27 – 1.35 kg/l.
  • Viscosity at 25ºC: 120 -120.
  • Flash Point: Non-flammable.
  •  
  • Mixing: Stir well before use.
  • Method: Sheepskin roller or brush. For a more pronounced texture use a honeycomb sponge roller.
  • Thinning: Not recommended, but tap water if required (First coat). Thinning reduces the opacity as well as crack bridging properties.
  • Clean up: Tap water
  • Spreading rate: 3 – 5 m ²/l depending on surface porosity and profile.
  • Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
  • Drying time: ½ – 1 hour at 25 degrees. Hard dry 4 hours at 25ºC.
  • Requirements: 2 coats.
  •  
Back to product range
  • New Surfaces must be sound, clean and dry before painting.
  • Concrete and cement: Apply 2 coats direct on the surface. The first coat can be thinned to a maximum of 10% water.
  • Fibre Cement: Apply 2 coats. The 1st coat may be thinned with 10% clean water to aid penetration.
  • PVC gutters and downpipes: Should be abraded with fine sandpaper before the topcoat can be applied.
  • Previously Painted Surfaces must be sound (no chalking), clean and dry before painting.

After all surfaces are sound, clean and dry apply 2 coats of Versus Textured Paint W.G.

Enamel surfaces must be sanded first and then a coat of Versus Universal Undercoat must be applied before applying the topcoat.

  • Keep containers properly sealed.
  • Store away from direct heat, sun and severe cold.
  • 20 Litres.
  • Detailed safety information: refers to the material safety data sheet for this product.
  • Do not apply directly to bare metal surfaces.
  • Do not paint in wet or cold weather. (Minimum 8ºC.)
  • Drying times will be extended during wet or cold weather conditions.
  • Do not apply direct to chalky or friable surfaces. Apply a penetrating coat of Versus Bonding Liquid or Versaprime Plaster Primer.

TEXTURED ACRYLIC COATING W.G. - no spec

  • A fine matt textured paint which provides high cover and is very flexible for interior and exterior use.
  • For application as a finishing coat for exterior new or previously painted cement plaster, concrete and fiber cement.
  • Particularly recommended to obliterate hairline cracks in cement plaster.
  • For areas prone to mould growth.
  • Ideal for high traffic areas or areas that may require frequent washing.
  • Water based: Easy to apply and easy clean up.
  • Water resistance: Surpasses the SABS 0400:1900 Code of Practice rain penetration test over a 24 hour period.
  • It contains mould inhibitors providing protection against mould regrowth.
  • Excellent weather resistance.
  • UV Resistant.
  • Excellent exterior durability.
  • Good color stability.
  • Very good opacity, and alkali resistance, stain resistance and wash ability.-
  •  
  • Type: Pure Acrylic.
  • Appearance: Matt Texture.
  • Colors: White and a range of 16 standard colors. Pastel and Medium colors can be tinted on request.
  • Solids: 54 – 56% by volume.
  • Density: 1.27 – 1.35 kg/l.
  • Viscosity at 25ºC: 120 -120.
  • Flash Point: Non-flammable.
  •  
  • Mixing: Stir well before use.
  • Method: Sheepskin roller or brush. For a more pronounced texture use a honeycomb sponge roller.
  • Thinning: Not recommended, but tap water if required (First coat). Thinning reduces the opacity as well as crack bridging properties.
  • Clean up: Tap water
  • Spreading rate: 3 – 5 m ²/l depending on surface porosity and profile.
  • Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
  • Drying time: ½ – 1 hour at 25 degrees. Hard dry 4 hours at 25ºC.
  • Requirements: 2 coats.
  •  
Back to product range
  • New Surfaces must be sound, clean and dry before painting.
  • Concrete and cement: Apply 2 coats direct on the surface. The first coat can be thinned to a maximum of 10% water.
  • Fibre Cement: Apply 2 coats. The 1st coat may be thinned with 10% clean water to aid penetration.
  • PVC gutters and downpipes: Should be abraded with fine sandpaper before the topcoat can be applied.
  • Previously Painted Surfaces must be sound (no chalking), clean and dry before painting.

After all surfaces are sound, clean and dry apply 2 coats of Versus Textured Paint W.G.

Enamel surfaces must be sanded first and then a coat of Versus Universal Undercoat must be applied before applying the topcoat.

  • Keep containers properly sealed.
  • Store away from direct heat, sun and severe cold.
  • 20 Litres.
  • Detailed safety information: refers to the material safety data sheet for this product.
  • Do not apply directly to bare metal surfaces.
  • Do not paint in wet or cold weather. (Minimum 8ºC.)
  • Drying times will be extended during wet or cold weather conditions.
  • Do not apply direct to chalky or friable surfaces. Apply a penetrating coat of Versus Bonding Liquid or Versaprime Plaster Primer.

SURE WALL

  • A high durable water based emulsion paint offering excellent adhesion and weathering when applied correctly prepared surfaces.
  • Interior and exterior walls, ceilings, down pipes and gutters.
  • Ideal for use on high traffic areas or surfaces that may require frequent washing.
  •  
  • Water based: Low odor and easy cleaning.
  • Water resistance: Surpasses the SABS 0400:1900 Code of Practice rain penetration test over a 24 hour period.
  • Excellent weather resistance.
  • Quick Drying.
  • Excellent exterior durability.
  • Good color stability.
  • Very good opacity, stain resistance and wash ability.
  •  
  • Type: Modified Acrylic.
  • Appearance: Sheen.
  • Colors: White and a range of 16 Standard colors. Pastel, Medium and Deep tone colors can be tinted on request.
  • Solids: 50 – 52% by mass.
  • Density: 11.30-1.40 kg/l.
  • Recommended Dry Film Thickness: 1 coat at minimum 35 µ and maximum 45 µ.
  • VOC Levels: 20g/Lt.
  • Viscosity at 25ºC. : 95 -100 Krebs µ.
  • Flash Point: Non-flammable.
  •  
  • Mixing: Stir well before use.
  • Method: Sheepskin roller or brush. Can be applied using an airless spray gun.
  • Thinning: Not recommended, but tap water if required. Thinning reduces the opacity.
  • Clean up: Tap water.
  • Spreading rate: 8 – 10 m ²/l depending on surface porosity and profile.
  • Viscosity 95-100 Krebs µ
  • Relative Density 1.30 – 1.40
  • Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
  • Drying time: Touch dry ½ – 1 hour. Hard dry 4 hours at 25 degrees.
  • Recoating time: 4 – 6 hours.
  • Requirements: 2 coats.
  •  
Back to product range
  • New Surfaces must be sound, clean and dry before painting.
  • Concrete and cement should be filled with Versus Versafill.
  • Gypsum Plaster should be primed with Versus Plaster Primer.
  • Fiber Cement ceiling boards: the bare metal areas (nail heads) should be primed with Versus Steel Primer?
  • Wooden surfaces should be primed with Versus Pink Wood primer.
  • PVC gutters and downpipes should be degreased and then abraded with fine sandpaper and then the topcoat can be applied directly.
  • Previously Painted Surfaces must be sound, clean and dry before painting.

After all surfaces are sound, clean and dry apply one coat of Versus             Universal Undercoat as a tie coat. Other areas that have chalked and are powdery should be well sanded and sealed with Versus Plaster Primer.

  • Keep containers properly sealed.
  • Store away from direct heat, sun and severe cold.

 

  • 5 litres and 20 litres
  • Detailed safety information: refers to the material safety data sheet for this product.
  • Do not apply directly to bare metal surfaces.
  • Do not paint in wet or cold weather. (Minimum 8ºC.)
  • Drying times will be extended during wet or cold weather conditions.
  • Do not apply direct to chalky or friable surfaces. Apply a penetrating coat of Versus Bonding Liquid or Versaprime Plaster Primer.
 

ALTA MAREA SUPER ACRYLIC MID SHEEN

  • A high quality mid sheen finish flexible wall coating for interior and exterior use, providing excellent durability, weather resistance, colour stainability, opacity and wash ability.
  • Ideal for high traffic areas or surface that may be required frequent washing.
  • Surfaces must be clean and free from loose material.
  • Surfaces must be primed correctly utilizing surface preparations specifications recommended by the manufacturers.
  • May be applied directly onto clean previously painted surfaces.
  • With either a sheepskin roller or brush.
  • Can be applied using an airless spray gun.
  • Type:                           Modified Acrylic.
  • Water Resistance:      Surpasses the SABS 044:1900 Code of practice rain
    Penetration test over a 24 hour period. .
  • Drying Time:               Surface Dry ½ – 1 hour.
  • Viscosity:                     95-100 Kerb Units.
  • Relative Density:         1.2 – 1.25 kg/l.
  • Solid by Mass:            50-52%
  • Spreading rate:           8-10m²/litre depending on surface porosity and texture.
  • Finish:                          Mid Sheen
  • Clean-up:                    Water
  • Colour:                        White, Pastel, Medium and Deep Tone
Back to product range
  • Mixing: Stir well before use.
  • Method: Sheepskin roller or brush. Can be applied using an airless spray gun.
  • Thinning: Not recommended, but tap water if required. Thinning reduces the opacity.
  • Clean up: Tap water.
  • Spreading rate: 8 – 10 m ²/l depending on surface porosity and profile.
  • Viscosity 95-100 Krebs µ
  • Relative Density 1.2 – 1.25
  • Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
  • Drying time: Touch dry ½ – 1 hour. Hard dry 4 hours at 25 degrees.
  • Recoating time: 4 – 6 hours.
  • Requirements: 2 coats.
  •  
  • Keep containers properly sealed.
  • Store away from direct heat, sun and severe cold.
  • 5 litres and 20 litres
  • Detailed safety information: refers to the material safety data sheet for this product.
  • Do not apply directly to bare metal surfaces.
  • Do not paint in wet or cold weather. (Minimum 8ºC.)
  • Drying times will be extended during wet or cold weather conditions.
  • Do not apply direct to chalky or friable surfaces. Apply a penetrating coat of Versus Bonding Liquid or Versus Plaster Primer.

ALTA MAREA SUPER ACRYLIC MATT

  • A high performance, matt superior quality acrylic emulsion for interior and exterior high traffic areas.

    Meets the requirements of SABS 1586 Grade 1.

  • Final coats to interior and exterior sound plaster, hardboard and fiber cement.
  • Application to correctly primed metal and wood surfaces.
  • Water based: Low odor and easy cleaning.
  • Durability: Highly durable and UV resistant for the harsh South African climate.
  • Adhesion: Excellent adhesion if applied to sound surfaces.
  • Staining: Highly washable, meets the requirements of SABS and  ASTMS scrubs resistant test methods.
  • Low VOC: This product contains no toxic substances and very low levels of VOC (EU Regulations)
  • Life Expectancy: 7-10 years on condition preparation and application are done properly.
  • Type: 100% Acrylic.
  • Appearance:  Matt.
  • Colors:  White and Black.
  • Solids: 45% – 50%.
  • Density: 1.10 – 1.20.
  • Flash Point: Nonflammable.
Back to product range
  • Mixing: Stir well before use.
  • Method: Brush, roller or Airless Spray.
  • Thinning: Not recommended, but tap water if required. Thinning reduces the opacity. (Hiding power).
  • Clean up: Tap water
  • Spreading rate: 6-12 m ²/l depending on surface porosity and profile.
  • Conditions: Avoid painting in wet or cold weather. Minimum temp 8ºC.
  • Drying time: Touch dry ½ – 1 hour.
  • Recoating time: 4-6 hours.
  • Requirements: 2 coats.
  •  

  • All Surfaces must be sound, clean and dry before painting.

    • New concrete surfaces: 1 coat of Versus Plaster Primer.
    • New or weathered fiber cement: 1 coat Versus Bonding Liquid.
    • New raw plaster: 1 coat Versus Plaster Primer.
    • Rusted metal areas need to be cleaned back to bright metal and spot primed with Versus Steel Primer.
    • New metal surfaces need to be abrasively degreased to remove the manufacturers grease protective layer this process is repeated until the surface is water break free. After drying the whole substrate is coated with Versus Steel Primer.
    • Keep containers properly sealed.
    • Store away from direct heat, sun and severe cold. 
  • 5 litres and 20 litres
  • Detailed safety information: refers to the material safety data sheet for this product.
  • Do not apply directly to bare metal surfaces.
  • Drying times will be extended during wet or cold weather conditions.

UTILITY PAINT

  • An acrylic economical grade coating for use on interior and exterior surfaces

  • All Surfaces must be sound, clean and dry before painting.

    • New plaster and concrete surfaces: 1 coat of Versus Plaster Primer.
    • Undercoated weathered or new fiber cement: 1 coat of Versus Bonding Liquid.
    • Previously painted surfaces: 1 coat Versus Bonding Liquid if friable or powdery.
    • Rusted metal: areas need to be cleaned back to bright metal and spot primed with Versus Steel Primer.
    • New metal surfaces: need to be abrasively degreased to remove the manufacturers grease protective layer this process is repeated until the surface is water break free. After drying the whole substrate is coated with Versus Steel Primer.
  • Suitable for use on interior and exterior plastered walls.
  • Can also be used on fiber cement and plaster ceilings.
  • Application to all surfaces with a suitable undercoat.
  • Water Based: Low odor and easy cleaning.
  • Durability: High durable and UV resistant for the harsh South African climate.
  • Weather resistant.
  • Exceptional hiding power and opacity.
  • Good wash ability.
  • Low VOC: This product contains non-toxic substances and very low levels of VOC (EU Regulations)
Back to product range
  • Type:                           Acrylic.
  • Relative Density:         1.40
  • Solid by Mass:            50%
  • Finish:                          Matt
  • Flash Point:                 Non-Flammable
  • Colour:                        White, Pastel
  •  
    • Mixing: Stir well before use.
    • Method: Sheepskin roller or brush. Can be applied using an airless spray gun.
    • Thinning: Not recommended, but tap water if required. Thinning reduces the opacity.
    • Clean up: Tap water.
    • Spreading rate: 8 – 10 m ²/l depending on surface porosity and profile.
    • Viscosity 95-100 Krebs µ
    • Relative Density 1.2 – 1.25
    • Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
    • Drying time: Touch dry ½ – 1 hour. Hard dry 4 hours at 25 degrees.
    • Recoating time: 4 – 6 hours.
    • Requirements: 2 coats.
    • Keep containers properly sealed.
    • Store away from direct heat, sun and severe cold.
  • 5 litres and 20 litres
  • Detailed safety information: refers to the material safety data sheet for this product.
  • Do not apply directly to bare metal surfaces.
  • Do not paint in wet or cold weather. (Minimum 8ºC.)
  • Drying times will be extended during wet or cold weather conditions.
  • Do not apply direct to chalky or friable surfaces. Apply a penetrating coat of Versus Bonding Liquid or Versus Plaster Primer.

STATUS ULTRA MATT

  • A high performance, matt superior quality acrylic emulsion for interior and exterior high traffic areas.

    Meets the requirements of SABS 1586 Grade 1.

    • Final coats to interior and exterior sound plaster, hardboard and fiber cement.
    • Application to correctly primed metal and wood surfaces.
  • Water based: Low odor and easy cleaning.
  • Durability: Highly durable and UV resistant for the harsh South African climate.
  • Adhesion: Excellent adhesion if applied to sound surfaces.
  • Staining: Highly washable, meets the requirements of SABS and ASTMS scrubs resistant test methods.
  • Low VOC: This product contains no toxic substances and very low levels of VOC (EU Regulations)
  • Life Expectancy: 7-10 years on condition preparation and application are done properly.
  • Type: 100% Acrylic.
  • Appearance:  Matt.
  • Colors:  White and arrange of 16 standard colors. Pastel, Medium and Deep tone. Colors can be tinted on request.
  • Solids: 45% – 50%. Bx Mass
  • Density: 1.2 – 1.25KG/ℓ.
  • Viscosity: at 25°ͨ 105-110 Kress
  • Flash Point: Nonflammable.
Back to product range
  • Mixing: Stir well before use.
  • Method: Brush, roller or Airless Spray.
  • Thinning: Not recommended, but tap water if required. Thinning reduces the opacity. (Hiding power).
  • Clean up: Tap water
  • Spreading rate: 6-12 m ²/l depending on surface porosity and profile.
  • Conditions: Avoid painting in wet or cold weather. Minimum temp 8ºC.
  • Drying time: Touch dry ½ – 1 hour.
  • Recoating time: 4-6 hours.
  • Requirements: 2 coats.

    • All Surfaces must be sound, clean and dry before painting.

      • New concrete surfaces: 1 coat of Versus Plaster Primer.
      • New or weathered fiber cement: 1 coat Versus Bonding Liquid.
      • New raw plaster: 1 coat Versus Plaster Primer.
      • Rusted metal areas need to be cleaned back to bright metal and spot primed with Versus Steel Primer.
      • New metal surfaces need to be abrasively degreased to remove the manufacturers grease protective layer this process is repeated until the surface is water break free. After drying the whole substrate is coated with Versus Steel Primer.
    • Keep containers properly sealed.
    • Store away from direct heat, sun and severe cold.
  • 5 litres and 20 litres
  • Detailed safety information: refers to the material safety data sheet for this product.
  • Do not apply directly to bare metal surfaces.
  • Drying times will be extended during wet or cold weather conditions.

Experience the difference for yourself.

Transform your space today with our high-quality, premium paints and expert services. Elevate your walls to a level of sophistication that will leave a lasting impression. Contact Versus Paint now and experience the difference for yourself. Let’s create a masterpiece together.

Talk to us

011 885 3136

Send us email

info@versuspaint.co.za

Trust Versus Paint to bring sophistication and style to every brush stroke.

Request a call back

Everything we do is done with a sense of purpose and passion. We know what it takes to make a statement, and we do it with flair.

Join us in the world of luxury, where only the best will do. Choose Versus Paint and experience the Lux Life in all its glory.

Quick Links

Services

Follow us online

Facebook Twitter Linkedin Whatsapp

Newsletter

Sign up our newsletter to get update information, news and free insight.

Copyright © 2024 Versus Paint. , All rights reserved. Created with love - www.itsmadness.co.za